产品详细

产品特性

以时间阀与流量阀為基础,结合了时间阀与流量阀的特点減少了使用数量与安装空

间,更加適用於複杂环境的安装;缸径φ20,启动压力为2Mpa,最高工作压力

7Mpa;

时间范围:1S-10S。

时间范围会因被调整油缸的缸径大小,行程及油缸压力的变化而有所差别。

注意事项

将密封螺母松开,调节时间顺序阀至所需时间,右旋调节杆时间变长,左旋调节杆

时间变短:

调整好时间后,将密封螺母锁紧。

温馨提示:请在回油时调整时间阀。

使用流体:相当于ISO 粘度等级的ISO-VG-32 一般液压油。

FEATURES

Based on the time of valve and the flow valve, combining with the characteristics of the valve and discharge valve to

reduce the use quantity and installation space, more use in the installation of a complex environment;

Cylinder diameter phi 20, start-up

pressure 2 mpa, the highest working

pressure 7 mpa;

Time range: 1 s to 10 s.

Time range will be adjust to the size of cylinder bore, stroke and the change of cylinder

pressure is different.

NOTE

Will seal nut loosen

Adjusting the time sequence valve to the time required,

slow right-lateral regulating rod, left-handed regulating rod shorter time:

After adjust time, seal nut lock.

Warm prompt: please adjust the time when oil returns valve.

Usable fluid: General Hydraulic Oil Equivalent to ISO-VG-32